Tubular Circuit Breaker Custom Parts

As the name suggest these Lugs are specially made for terminating large cables to circuit breakers. Since Flash over distances have reduced, the connecting tunnel in breakers have become narrower. Thus fitting lugs in 150A to 250A breakers has become a problem because the palms of the conventional lugs are too wide. To counter this problem we use a special extrusion process to make a narrow palm that can easily be inserted in the connecting tunnel. The lugs also have a bell-mouth on the barrel opening to facilitate easy-entry of the conductor.

Technique Data
Conductor Bolt Ø CAT No. C1 C2 J
35 M 6 3D-2067NP 8 6.5 38
50 M 6 3D-2063NP 9.2 6.5 39
M 10 3D-2069NP 9.2 10.5 45
70 M 8 3D-2070NP 11.2 8.5 41
M 10 3D-2071NP 11.2 10.5 47
95 M 8 3D-2072NP 13 8.5 46
M 10 3D-2073NP 13 10.5 50
120 M 8 3D-2074NP 15 8.5 56
M 10 3D-2075NP 15 10.5 56
150 M 8 3D-2076NP 16.5 8.5 61
M 10 3D-2077NP 16.5 10.5 61
185 M 10 3D-2078NP 19 10.5 69
240 M 10 3D-2079NP 21 10.5 74

Product Range

Customer / Enquiries